c-project/libs/glfw-3.3.2/docs/intro.dox

/*!

@page intro_guide Introduction to the API

@tableofcontents

This guide introduces the basic concepts of GLFW and describes initialization,
error handling and API guarantees and limitations.  For a broad but shallow
tutorial, see @ref quick_guide instead.  For details on a specific function in
this category, see the @ref init.

There are also guides for the other areas of GLFW.

 - @ref window_guide
 - @ref context_guide
 - @ref vulkan_guide
 - @ref monitor_guide
 - @ref input_guide


@section intro_init Initialization and termination

Before most GLFW functions may be called, the library must be initialized.
This initialization checks what features are available on the machine,
enumerates monitors and joysticks, initializes the timer and performs any
required platform-specific initialization.

Only the following functions may be called before the library has been
successfully initialized, and only from the main thread.

 - @ref glfwGetVersion
 - @ref glfwGetVersionString
 - @ref glfwGetError
 - @ref glfwSetErrorCallback
 - @ref glfwInitHint
 - @ref glfwInit
 - @ref glfwTerminate

Calling any other function before successful initialization will cause a @ref
GLFW_NOT_INITIALIZED error.


@subsection intro_init_init Initializing GLFW

The library is initialized with @ref glfwInit, which returns `GLFW_FALSE` if an
error occurred.

@code
if (!glfwInit())
{
    // Handle initialization failure
}
@endcode

If any part of initialization fails, any parts that succeeded are terminated as
if @ref glfwTerminate had been called.  The library only needs to be initialized
once and additional calls to an already initialized library will return
`GLFW_TRUE` immediately.

Once the library has been successfully initialized, it should be terminated
before the application exits.  Modern systems are very good at freeing resources
allocated by programs that exit, but GLFW sometimes has to change global system
settings and these might not be restored without termination.


@subsection init_hints Initialization hints

Initialization hints are set before @ref glfwInit and affect how the library
behaves until termination.  Hints are set with @ref glfwInitHint.

@code
glfwInitHint(GLFW_JOYSTICK_HAT_BUTTONS, GLFW_FALSE);
@endcode

The values you set hints to are never reset by GLFW, but they only take effect
during initialization.  Once GLFW has been initialized, any values you set will
be ignored until the library is terminated and initialized again.

Some hints are platform specific.  These may be set on any platform but they
will only affect their specific platform.  Other platforms will ignore them.
Setting these hints requires no platform specific headers or functions.


@subsubsection init_hints_shared Shared init hints

@anchor GLFW_JOYSTICK_HAT_BUTTONS
__GLFW_JOYSTICK_HAT_BUTTONS__ specifies whether to also expose joystick hats as
buttons, for compatibility with earlier versions of GLFW that did not have @ref
glfwGetJoystickHats.  Set this with @ref glfwInitHint.


@subsubsection init_hints_osx macOS specific init hints

@anchor GLFW_COCOA_CHDIR_RESOURCES_hint
__GLFW_COCOA_CHDIR_RESOURCES__ specifies whether to set the current directory to
the application to the `Contents/Resources` subdirectory of the application's
bundle, if present.  Set this with @ref glfwInitHint.

@anchor GLFW_COCOA_MENUBAR_hint
__GLFW_COCOA_MENUBAR__ specifies whether to create a basic menu bar, either from
a nib or manually, when the first window is created, which is when AppKit is
initialized.  Set this with @ref glfwInitHint.


@subsubsection init_hints_values Supported and default values

Initialization hint             | Default value | Supported values
------------------------------- | ------------- | ----------------
@ref GLFW_JOYSTICK_HAT_BUTTONS  | `GLFW_TRUE`   | `GLFW_TRUE` or `GLFW_FALSE`
@ref GLFW_COCOA_CHDIR_RESOURCES | `GLFW_TRUE`   | `GLFW_TRUE` or `GLFW_FALSE`
@ref GLFW_COCOA_MENUBAR         | `GLFW_TRUE`   | `GLFW_TRUE` or `GLFW_FALSE`


@subsection intro_init_terminate Terminating GLFW

Before your application exits, you should terminate the GLFW library if it has
been initialized.  This is done with @ref glfwTerminate.

@code
glfwTerminate();
@endcode

This will destroy any remaining window, monitor and cursor objects, restore any
modified gamma ramps, re-enable the screensaver if it had been disabled and free
any other resources allocated by GLFW.

Once the library is terminated, it is as if it had never been initialized and
you will need to initialize it again before being able to use GLFW.  If the
library was not initialized or had already been terminated, it return
immediately.


@section error_handling Error handling

Some GLFW functions have return values that indicate an error, but this is often
not very helpful when trying to figure out what happened or why it occurred.
Other functions have no return value reserved for errors, so error notification
needs a separate channel.  Finally, far from all GLFW functions have return
values.

The last [error code](@ref errors) for the calling thread can be queried at any
time with @ref glfwGetError.

@code
int code = glfwGetError(NULL);

if (code != GLFW_NO_ERROR)
    handle_error(code);
@endcode

If no error has occurred since the last call, @ref GLFW_NO_ERROR (zero) is
returned.  The error is cleared before the function returns.

The error code indicates the general category of the error.  Some error codes,
such as @ref GLFW_NOT_INITIALIZED has only a single meaning, whereas others like
@ref GLFW_PLATFORM_ERROR are used for many different errors.

GLFW often has more information about an error than its general category.  You
can retrieve a UTF-8 encoded human-readable description along with the error
code.  If no error has occurred since the last call, the description is set to
`NULL`.

@code
const char* description;
int code = glfwGetError(&description);

if (description)
    display_error_message(code, description);
@endcode

The retrieved description string is only valid until the next error occurs.
This means you must make a copy of it if you want to keep it.

You can also set an error callback, which will be called each time an error
occurs.  It is set with @ref glfwSetErrorCallback.

@code
glfwSetErrorCallback(error_callback);
@endcode

The error callback receives the same error code and human-readable description
returned by @ref glfwGetError.

@code
void error_callback(int code, const char* description)
{
    display_error_message(code, description);
}
@endcode

The error callback is called after the error is stored, so calling @ref
glfwGetError from within the error callback returns the same values as the
callback argument.

The description string passed to the callback is only valid until the error
callback returns.  This means you must make a copy of it if you want to keep it.

__Reported errors are never fatal.__  As long as GLFW was successfully
initialized, it will remain initialized and in a safe state until terminated
regardless of how many errors occur.  If an error occurs during initialization
that causes @ref glfwInit to fail, any part of the library that was initialized
will be safely terminated.

Do not rely on a currently invalid call to generate a specific error, as in the
future that same call may generate a different error or become valid.


@section coordinate_systems Coordinate systems

GLFW has two primary coordinate systems: the _virtual screen_ and the window
_content area_ or _content area_.  Both use the same unit: _virtual screen
coordinates_, or just _screen coordinates_, which don't necessarily correspond
to pixels.

<img src="spaces.svg" width="90%" />

Both the virtual screen and the content area coordinate systems have the X-axis
pointing to the right and the Y-axis pointing down.

Window and monitor positions are specified as the position of the upper-left
corners of their content areas relative to the virtual screen, while cursor
positions are specified relative to a window's content area.

Because the origin of the window's content area coordinate system is also the
point from which the window position is specified, you can translate content
area coordinates to the virtual screen by adding the window position.  The
window frame, when present, extends out from the content area but does not
affect the window position.

Almost all positions and sizes in GLFW are measured in screen coordinates
relative to one of the two origins above.  This includes cursor positions,
window positions and sizes, window frame sizes, monitor positions and video mode
resolutions.

Two exceptions are the [monitor physical size](@ref monitor_size), which is
measured in millimetres, and [framebuffer size](@ref window_fbsize), which is
measured in pixels.

Pixels and screen coordinates may map 1:1 on your machine, but they won't on
every other machine, for example on a Mac with a Retina display.  The ratio
between screen coordinates and pixels may also change at run-time depending on
which monitor the window is currently considered to be on.


@section guarantees_limitations Guarantees and limitations

This section describes the conditions under which GLFW can be expected to
function, barring bugs in the operating system or drivers.  Use of GLFW outside
of these limits may work on some platforms, or on some machines, or some of the
time, or on some versions of GLFW, but it may break at any time and this will
not be considered a bug.


@subsection lifetime Pointer lifetimes

GLFW will never free any pointer you provide to it and you must never free any
pointer it provides to you.

Many GLFW functions return pointers to dynamically allocated structures, strings
or arrays, and some callbacks are provided with strings or arrays.  These are
always managed by GLFW and should never be freed by the application.  The
lifetime of these pointers is documented for each GLFW function and callback.
If you need to keep this data, you must copy it before its lifetime expires.

Many GLFW functions accept pointers to structures or strings allocated by the
application.  These are never freed by GLFW and are always the responsibility of
the application.  If GLFW needs to keep the data in these structures or strings,
it is copied before the function returns.

Pointer lifetimes are guaranteed not to be shortened in future minor or patch
releases.


@subsection reentrancy Reentrancy

GLFW event processing and object destruction are not reentrant.  This means that
the following functions must not be called from any callback function:

 - @ref glfwDestroyWindow
 - @ref glfwDestroyCursor
 - @ref glfwPollEvents
 - @ref glfwWaitEvents
 - @ref glfwWaitEventsTimeout
 - @ref glfwTerminate

These functions may be made reentrant in future minor or patch releases, but
functions not on this list will not be made non-reentrant.


@subsection thread_safety Thread safety

Most GLFW functions must only be called from the main thread (the thread that
calls main), but some may be called from any thread once the library has been
initialized.  Before initialization the whole library is thread-unsafe.

The reference documentation for every GLFW function states whether it is limited
to the main thread.

Initialization, termination, event processing and the creation and
destruction of windows, cursors and OpenGL and OpenGL ES contexts are all
restricted to the main thread due to limitations of one or several platforms.

Because event processing must be performed on the main thread, all callbacks
except for the error callback will only be called on that thread.  The error
callback may be called on any thread, as any GLFW function may generate errors.

The error code and description may be queried from any thread.

 - @ref glfwGetError

Empty events may be posted from any thread.

 - @ref glfwPostEmptyEvent

The window user pointer and close flag may be read and written from any thread,
but this is not synchronized by GLFW.

 - @ref glfwGetWindowUserPointer
 - @ref glfwSetWindowUserPointer
 - @ref glfwWindowShouldClose
 - @ref glfwSetWindowShouldClose

These functions for working with OpenGL and OpenGL ES contexts may be called
from any thread, but the window object is not synchronized by GLFW.

 - @ref glfwMakeContextCurrent
 - @ref glfwGetCurrentContext
 - @ref glfwSwapBuffers
 - @ref glfwSwapInterval
 - @ref glfwExtensionSupported
 - @ref glfwGetProcAddress

The raw timer functions may be called from any thread.

 - @ref glfwGetTimerFrequency
 - @ref glfwGetTimerValue

The regular timer may be used from any thread, but reading and writing the timer
offset is not synchronized by GLFW.

 - @ref glfwGetTime
 - @ref glfwSetTime

Library version information may be queried from any thread.

 - @ref glfwGetVersion
 - @ref glfwGetVersionString

All Vulkan related functions may be called from any thread.

 - @ref glfwVulkanSupported
 - @ref glfwGetRequiredInstanceExtensions
 - @ref glfwGetInstanceProcAddress
 - @ref glfwGetPhysicalDevicePresentationSupport
 - @ref glfwCreateWindowSurface

GLFW uses synchronization objects internally only to manage the per-thread
context and error states.  Additional synchronization is left to the
application.

Functions that may currently be called from any thread will always remain so,
but functions that are currently limited to the main thread may be updated to
allow calls from any thread in future releases.


@subsection compatibility Version compatibility

GLFW uses [Semantic Versioning](https://semver.org/).  This guarantees source
and binary backward compatibility with earlier minor versions of the API.  This
means that you can drop in a newer version of the library and existing programs
will continue to compile and existing binaries will continue to run.

Once a function or constant has been added, the signature of that function or
value of that constant will remain unchanged until the next major version of
GLFW.  No compatibility of any kind is guaranteed between major versions.

Undocumented behavior, i.e. behavior that is not described in the documentation,
may change at any time until it is documented.

If the reference documentation and the implementation differ, the reference
documentation will almost always take precedence and the implementation will be
fixed in the next release.  The reference documentation will also take
precedence over anything stated in a guide.


@subsection event_order Event order

The order of arrival of related events is not guaranteed to be consistent
across platforms.  The exception is synthetic key and mouse button release
events, which are always delivered after the window defocus event.


@section intro_version Version management

GLFW provides mechanisms for identifying what version of GLFW your application
was compiled against as well as what version it is currently running against.
If you are loading GLFW dynamically (not just linking dynamically), you can use
this to verify that the library binary is compatible with your application.


@subsection intro_version_compile Compile-time version

The compile-time version of GLFW is provided by the GLFW header with the
`GLFW_VERSION_MAJOR`, `GLFW_VERSION_MINOR` and `GLFW_VERSION_REVISION` macros.

@code
printf("Compiled against GLFW %i.%i.%i\n",
       GLFW_VERSION_MAJOR,
       GLFW_VERSION_MINOR,
       GLFW_VERSION_REVISION);
@endcode


@subsection intro_version_runtime Run-time version

The run-time version can be retrieved with @ref glfwGetVersion, a function that
may be called regardless of whether GLFW is initialized.

@code
int major, minor, revision;
glfwGetVersion(&major, &minor, &revision);

printf("Running against GLFW %i.%i.%i\n", major, minor, revision);
@endcode


@subsection intro_version_string Version string

GLFW 3 also provides a compile-time generated version string that describes the
version, platform, compiler and any platform-specific compile-time options.
This is primarily intended for submitting bug reports, to allow developers to
see which code paths are enabled in a binary.

The version string is returned by @ref glfwGetVersionString, a function that may
be called regardless of whether GLFW is initialized.

__Do not use the version string__ to parse the GLFW library version.  The @ref
glfwGetVersion function already provides the version of the running library
binary.

The format of the string is as follows:
 - The version of GLFW
 - The name of the window system API
 - The name of the context creation API
 - Any additional options or APIs

For example, when compiling GLFW 3.0 with MinGW using the Win32 and WGL
back ends, the version string may look something like this:

@code
3.0.0 Win32 WGL MinGW
@endcode

*/